The enclosed bridge was fitted with a spiral staircase from the fully fitted rest area which
has stairs down to the cell area via a watertight door. Full working nav/mast lights,
searchlight, horn + two-tone siren, voice announcement system and working sequenced
red/blue flashing lights. Fitted to the flying bridge frame work is a sun shade with the
Royal Montserrat Police emblem printed on it.

The Power System is:- MFA 540 Motor to supplied shaft & prop supplied by a 6v 4.5Ah 
SLA Battery.  Speed control is from J. Perkins rated 50amp forward & 30amp reverse.
RX battery is a 4.8v 800mAh NiMH pack. Aux power for lights etc is a 6.0v 2100mAh NiMH
Pack and the sound/voice unit is powered from a 4.8v 700mAh NiMH pack. RX/TX Multiplex
Cockpit SX Synthesised system on 40MHz. All Circuits are through home made distribution
boards with blade type fuses/holders, they have built in sockets for charging and separate
on/off switches. Connections to superstructure via home made harness with Futaba type
plugs/sockets. Yes it all fits but took some planning the main SLA can be replaced with a
buggy type pack if required but goes fine on 6V.

The model will be displayed on the Wearside Club stand at the the South Shields Model
Boat Show, Temple Park, John Reid Road, South Shields NE34 8QN on April 10-11, 2010.