|
PUFFER Basic Assembly by Dave Milbourn The model is best fitted with
a micro-servo for steering, such as the HiTech HS55. We also found that the
same manufacturer's Feather 4-channel receiver was ideal, although a
standard 2-channel receiver is small enough to fit easily inside the hull.
We recommend the use of an electronic micro-sized speed controller such as
M/Tronik's "M/Sonik4/1 Marine" or ACTion's P68A. Both of these
have a Battery Eliminator Circuit which enables you to run both the motor
and RC gear from the same battery pack. The motor supplied with the kit does
not require any further electrical suppression. This prototype model has a
variety of sound effects and a smoke generator fitted. Details of these
units can be obtained from ACTion,
www.action-electronics.co.uk
A full set of fittings, etched brass components are provided. Click for kit contents. |
|
|
Click on photos to enlarge |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |