|
Kit Contents
|
Formed in high impact styrene the kit
contains: a one-piece hull moulding together with a formed deck, one-piece
cabin, bulkhead moulding, motor mount, shaft and rudder supports, battery
and radio trays. A set of fittings, a motor, prop shaft and propeller,
plastic tube coupling, a single rudder/tiller arm assembly. |
|
Other items include window
glazing material and window decals (for those who do not wish to cut out
the windows), rubber fender, wire to fabricate the railings and all
necessary items to build the model as illustrated. Step-by-step drawings,
instructions and plan. This kit is not recommended for children.
Crew figures not supplied.
UK Kit price
£49
Post and Packing: £8 |
EU
Kit price £49
Post and Packing £25 |
Rest of the world:
VAT-free
Kit price £41
Post and Packing £35 |
Additional items
required to complete the model:
▪ Tools: a good pair of
scissors; a modelling knife; fine wet or dry abrasive paper; a sanding block; small round
and flat files; pliers; a steel rule; masking tape, rubber bands and
adhesive foam pads. And a 30W soldering iron if you wish to solder.
▪ Adhesives: a tube of
polystyrene cement, liquid polystyrene glue, thick cyanoacrylate
(Superglue), 2-pack Epoxy, R/C Modellers Craft Glue or Flair Canopy Glue, or Weldbond
(for window glazing). Humbrol plastic filler, contact adhesive.
▪ Paints: Humbrol enamels
or Tamiya; alternatively Halford's acrylic aerosols.
▪ R/C requirements: 2-channel radio, 5
to 10amp electronic speed control or a 10amp micro-switch to motor
control, 7.2v 2400mA NiCd sub-C Power Pack and charger.
Installation of ACTION Units - Available direct from
www.action-electronics.co.uk
Custom
Lettering and Numbers are available direct from:
Barry's Model Lettering, Tel: 0116 2891511,
www.modellettering.com
|
